It’s always nice to have repeat customers & this happened to us with a commercial customer recently. We had previously cleaned some conference chairs for a community centre in Bath last year & following on from a years worth of wear/soiling they asked us to return & clean them again this year.

So this week saw our technician Jake spend a solid few hours cleaning 46 upholstered chairs in the hall.

In order to protect the floor, the first thing Jake did was to set a couple of tarpaulins under the chairs.

To get the clean off to a good start, all the chairs were thoroughly vacuumed first to remove as much surface debris as possible.

For the remainder of the clean, the following process was implemented;

• Spot/stain treatments as necessary
• Eco-santising pre-spray applied – This is then given time to dwell to help breakdown any stubborn soiling
• Rotary Agitation – This part of the process uses hot water & cleaning solutions to further breakdown any soiling & ensure a thorough clean on the surface of the chairs as well as into some of the cushioned seat.
• Traditional Rinse Extraction – This is where all the water, cleaning solutions & soiling is extracted from the chairs. This part of the process is where you really get to see the results from following all the steps above.

The images above show the beginning, during & after part of the deep clean & show that Jake achieved some really great results here.

If you would like to arrange a survey of commercial upholstery such as this or even if it is some domestic chairs/sofas, please do not hesitate to contact us today. All of our contact details can be found here – Contact Us

We hope to hear from you soon!